Supported Camera
Welcome to the Camera List. To navigate through this section, use the sidebar on the right.
At the time of writing, the lists below are not complete and needs further updating. If you know of a certain camera's way of REC triggering, please let us know via:
Sony Multi-Terminal Protocol
It seems that any camera from Sony that has this Multi-USB port can use this protocol for REC triggering.
How to make Sony Multi USB connector? Wiring?
| Camera | Support info | Camera | Support info | Camera | Support info |
|---|---|---|---|---|---|
| A5000 | yes | A7S | yes | A7R | yes |
| A5100 | yes | A7S2 | yes | A7R2 | yes |
| A6000 | yes | A7S3 | yes | A7R3 | yes |
| A6100 | yes | A7M | yes | A7R4 | yes |
| A6300 | yes | A7M2 | yes | FX3 | yes |
| A6400 | yes | A7M3 | yes | FX6 | yes |
| A6500 | yes | A7M4 | yes | FX9 | yes |
| A6600 | yes | A7C | no | FS5 | yes |
Momentary Ground
As the name implies, momentarily shorting a pin in one of the camera's port(s) to ground triggers REC start/stop. Many cameras support triggering REC using this method.
| Brand | Model | Support info | Notes |
|---|---|---|---|
| Blackmagic Design | Pocket Cinema Camera 4k | yes | w/ZITAY recording cable |
| Blackmagic Design | Pocket Cinema Camera 6k | yes | w/ZITAY recording cable |
| Blackmagic Design | Pocket Cinema Camera 6k pro | yes | w/ZITAY recording cable |
| Kinefinity | MAVO LF 6k | yes | |
| Kinefinity | MAVO Edge 6K | yes | |
| Kinefinity | MAVO Edge 8K | yes | |
| RED | DSMC2 | yes | |
| RED | RANGER | yes | |
| Panasonic | Lumix DMC-GH1 | yes | w/Panasonic Custom Trigger Connector |
| Panasonic | Lumix DMC-GH2 | yes | w/Panasonic Custom Trigger Connector |
| Panasonic | Lumix DMC-GH3 | yes | w/Panasonic Custom Trigger Connector |
| Panasonic | Lumix DMC-GH4 | yes | w/Panasonic Custom Trigger Connector |
| Panasonic | Lumix DMC-GH5 | yes | w/Panasonic Custom Trigger Connector |
| Panasonic | Lumix DC-GH5S | yes | w/Panasonic Custom Trigger Connector |
| More.. | To Be Appended |
3.3V Schmitt Trigger
Pull a pin of a port to 3.3V level to start REC, and pull it back to 0V to stop REC.
| Brand | Model | Support info |
|---|---|---|
| RED | DSMC | yes |
| RED | DSMC2 | yes |
ZCAM UART protocol
All ZCAM cameras are theoretically supported, but have only been verified on the E2 series.
| Model | Support info | Note | Model | Support info | Note |
|---|---|---|---|---|---|
| E2 | yes | E2-S6 | yes | ||
| E2C | no | E2-F6 | yes | ||
| E2G | yes | E2-F8 | yes | ||
| E2-M4 | yes | E2-S6G | yes |